What Are the Fabric Dyeing Methods?

What Are the Fabric Dyeing Methods?


he method of concealing, by applying surface hues to free fiber, string and surface are called surface shading. Being accomplished for an enormous number of years, it has tried from various perspectives until today, and extraordinary results have been procured. At the present time, Viktoria Fabric Dyes, which is one of the best brandmarks of surface shading, suggests 3 particular styles of it. These are; Bucket or Sink Method, Boiling Method and Washing-Machine Method. These methodologies will be explained in the going with sections.

I. Bowl or Sink Method

• This surface shading method is finished by filling a bowl or a huge compartment with water or obstructing the channel of the sink; so as to fill it with water.

• If the action is done some place out of the sink; the spread should be spread so as not the water to stream out.

• Before starting this surface shading action, the sink or the shot should be stacked up with 60 C bubbling water, as the experts urge, and the powder surface shading should be separated with warmed water in another compartment.

• If the concealing is too much light, to some degree more shading should be incorporated, anyway if it is too dull bubbling water should be incorporated.

• The separated shading should be poured to where the water is and should be blended for quite a while.

• After being liberated from the aggregate of its stains, the thing to be shaded is put where the shading is, by being wet, and water and the shading are mixed for 10 minutes, without offering a respite.

• The surface that is kept in the water for at any rate 30 minutes and generally for an hour, is expelled from the water when inferred that it has the typical concealing.

• Just ensuing to shading, Fiske surface shading stabilizer is applied according to the rules.

• You should then wash the shaded surface with cold water. After this, wash your surface with warm water and a fragile chemical; flush it and dry it. In the wake of getting dried, your surface will have the ordinary concealing.

II. Gurgling Method

Gurgling is another methodology used for surface shading.

• An immense pot where surface can move successfully is stacked up with water and this pot is put on the cookstove. The cookstove is turned on and when the water fires warming up the shading is incorporated into the water.

• The thing to be hued is wetted and hurled into the water.

• The thing to be hued is put where the shading is, by wetting; in the wake of being cleaned of all of its stains. It is blended in the underlying 10 minutes without offering a respite.

• After this movement, wash the hued surface with cold water. By then, wash your surface with warm water and sensitive chemical, flush and dry it. In the wake of drying, your surface will have the typical concealing.

III. Garments washer Method

You can without a lot of a stretch shading your surface with garments washer surface shading procedure.

• The temperature level of the garments washer should be fixed at the most noteworthy level. Moreover, the time setting should be fixed with the end goal that the machine will work in any occasion 30 minutes.

• The surface shading is melted absolutely by mixing it with warmed water in a plastic pot. In it, 1 teaspoon of tidying up liquid is incorporated.

• In another pot; if cotton or material is being hued, salt should be broken down in 4 glasses of extraordinarily bubbling water; and if silk or nylon is being shaded, some vinegar and 2-4 glasses of high temp water should be blended(mixed( together.

• Firstly the shading, and starting now and into the foreseeable future, the vinegar and salt are spilt into the chemical box of the garments washer and it should be turned on.

• After the machine stops, the hued surface is washed by and by with warm water and it gets readied to use.


Enregistrer un commentaire

0 Commentaires